Several individuals are being instructed in how to perform geophysical survey by Duncan Hale
Duncan Hale from Archaeological Services Durham University explains how to use magnetometer

Geophysical Survey for Locating Grave Sites

Duncan Hale (Archaeological Services, Durham University) has conducted geophysical surveys of sites throughout the world and for many years using a range of different techniques. He is used to working in different and challenging geological environments and searching for different types of features. Here he discusses the forensic applications of these techniques.

Geophysics

Geophysics is a form of remote sensing - it is a way of detecting ‘anomalies’ below the surface without physically disturbing the ground. Geophysics has been used in archaeology for many years, because it is a sensitive and quick way of surveying sub-surface features without the time-consuming, expensive and destructive process of excavation. It is being used increasingly in forensic cases because it is a way of conducting a rapid survey of sub-surface features and is also non-intrusive. Another advantage is that the survey data can be downloaded, processed and interpreted on site within a few minutes.

Two people looking at a laptop computer which is resting on the boot of a van. They are processing geophysical data Processing geophysical data on-site

Different techniques are available for different situations

There are a number of different geophysical techniques. The most common ones being:

  • Magnetometry
  • Earth electrical resistance (‘resistivity’)
  • Ground-penetrating radar (GPR)
  • Metal detectors

An image produced using remote sensing. It shows a square building underneath the surface of the ground A geophysical image of a building located under the ground surface

Technique selection

Determining which techniques might be suitable for a particular search requires information about the specific situation.

  • What the target/grave and its contents are likely to be
  • Site circumstances (eg geology, land use, vegetation, water etc)
  • Some techniques will vary in terms of effectiveness depending on the weather!

Electrical Resistance Survey

Electrical resistance survey is ideal for detecting stone features such as walls, paths and culverts, but can also detect soil-filled features, depending on ground conditions at the time of survey.

During electrical resistance survey, small electrical current is injected through the earth where it can encounter resistance which can be measured. Since resistance is linked to moisture content and porosity, stone and brick features will give relatively high resistance values while soil-filled features, which retain more moisture, will provide relatively low resistance values.

The porosity of a grave fill in the first month after being backfilled can produce a high resistance anomaly – greyscales before/after grave digging.

Experimental work with pig carcasses has shown that decomposition fluids can make graves detectable as low resistance anomalies after the initial settling of the grave fill and for a few months thereafter.

A team practices using Electrical Resistance Survey in a field A team practices using electrical resistance survey.

Magnetic Survey

Highly sensitive magnetometers are used to detect and record anomalies in the vertical component of the Earth’s magnetic field, which are caused by variations in soil magnetic susceptibility or permanent magnetisation.

Anomalies can reflect, for example, ferrous (containing iron), stone, brick and soil-filled features such as graves and pits. The grave fill and/or ferrous objects within it can sometimes be detected by this method including weapons such as a knife or gun.

Duncan has also used this method in water to quickly detect a firearm thrown into a river when police divers were unsuccessful!

An instructor explains how to use a magnetometer An instructor explains how to use a magnetometer.

An individual walks with a magnetometer A magnetometer being used to assess variation in the soil.

Ground-penetrating radar

This technique has been brought to public attention in the UK through high profile police cases such as the multiple bodies found buried in the garden of serial killers Fred & Rose West, Gloucester, 1994. Slightly more recently the technique was used to search for human remains at the orphanage of Haut de la Garenne in Jersey in 2008 and in 2018 at the mother and baby home with infants discarded in septic tanks at Tuam, Galway.

GPR works like bat sonar. It generates a short high-frequency radar pulse (radio wave) which is transmitted into the ground via an antenna; the energy is reflected by buried features and the return signal is received by a second antenna. The amplitude of the return signal relates to the electromagnetic responses of different sub-surface materials and conditions, which can be features of archaeological, historic or forensic interest. The time which elapses between the transmission and return of energy to the surface can be used to provide depth information.

Unlike the above electrical resistance survey and magnetometry, GPR does not measure the ‘bulk’ properties of materials. In certain ground conditions and antennae, this technique can detect sub-surface features such as mass graves at several metres depth.

GPR can be particularly useful in confined spaces and over concrete, where other techniques will not work.

An instructor discusses the GPR technique An instructor discusses how to use GPR.

Metal detectors

Metal detectors can be useful for checking over potential sites before excavation, and for the checking of spoil heaps during excavation. In some situations, it may be worth using a metal detector to locate and remove ferrous objects prior to undertaking a detailed magnetometer survey.

Where on Earth are we?

With all these techniques, data are collected in a systematic way, often using regular grids of, for example, 20m. Sampling intervals are usually determined by the anticipated size of the target. Higher-resolution surveys provide more information but are more time-consuming. This is however essential for smaller targets such as graves.

Final Comments on Geophysics

The use of geophysics in a forensic search programme requires the investigators to then test the anomalies which are detected. ‘Best practice’ follows a route from the non-invasive to the invasive in order to minimise loss of evidence, and is in accordance with Code B of the Police and Criminal Evidence Act (PACE; 1997), which requires investigations to be conducted with the minimum of disturbance to property.

Geophysics should not be used as a standalone technique in forensic investigations. Within archaeology, geophysical survey is integrated into wider search and excavation strategies and this provides a model of how it should be incorporated into forensic search and recover programmes. Every case is different; every situation is different. Geophysics in forensic investigations requires flexibility and adaptability, in both technique and methodology, to contribute most effectively.

It is also worth noting that as digital technologies develop rapidly there are new and effective methods being developed all of the time that will improve the search for grave-sites in the future.

Now that you’ve read how to identify grave sites, you’ll need to know how to excavate the body or bodies carefully. Move on to the next activity to find out more about how to excavate a body correctly.

Share this article:

This article is from the free online course:

Forensic Archaeology and Anthropology

Durham University