Skip to 0 minutes and 6 secondsA polymer is a large molecule made up of numerous small building blocks, called monomers. These monomer building blocks are joined together to form chains that are long and straight, or slightly branched, or highly interconnected. For example, linking together molecules of ethene, the simplest alkene, forms poly(ethene), or polythene. As just one type of monomer is used this is classed as a homopolymer. When two different types of monomers are joined in the same polymer chain, the polymer is called a copolymer. For example, linking together molecules of ethene with ethenyl ethanoate, which contains both alkene and ester groups, gives poly(ethylene vinyl acetate) or PEVA.

Skip to 0 minutes and 47 secondsIn PEVA, there are different ways in which the monomers could be linked - if they are linked alternately, it is called an alternating copolymer. In contrast, a block copolymer has long sequences of the same monomer unit, whilst, as the name suggests, for random copolymers the two monomers are linked in any order. Linear copolymers consist of a single main chain whereas branched copolymers consist of a single main chain with one or more polymeric side chains. If the side chains have a different structure to the main chain we call this a graft copolymer. With so many variations, it can be tricky to visualise the different structures of polymers, so in this activity we will model their structures using paper clips.

Skip to 1 minute and 32 secondsA paper clip will represent the monomer, which can be linked together, in different ways, to simulate the way monomers join up to form polymers. Start with using the same type of paper clips to model a linear homopolymer, then change it to a branched homopolymer - consider how the different chains can pack together - and then model a crosslinked homopolymer. Also, consider how different chains can twist and bend to form a tangled arrangement like cooked spaghetti tangled up on a plate. Now move on to using two different paper clips to model copolymers - alternating, random and then graft. There are some limitations to using paper clips, including the fact that it gives a two-dimensional model, whereas polymers make three-dimensional lattices.

Skip to 2 minutes and 16 secondsNevertheless the designs can be effective and fun to make! Be creative and take a picture of your favourite design, naming the polymer type and post your results - we look forward to seeing your stationery model!

Modelling polymers

Chemists often build molecular models using plastic rods and balls to represent different atoms and their bonding. It can often be easier to visualise the symmetry, shape and potential bonding interactions of a molecule when you have the 3-D model on hand to rotate.

In order to aid your understanding of how different types of polymer can be formed we are going to use paperclips to represent individual monomers. When joined together they will form different variations of polymer chains.

The following items will be required:

  • A large number of papers clips, preferably of different size and colour.

First take a set of paperclips all of the same size or colour. These all represent the same molecule. Joining them together shows how many of the same monomer can be used to form a long, polymer chain. If you had many of these chains adjacent to each other they would pack closely together and so you would have a high-density polymer.

straight chain example

Add some paperclips at regular intervals to act as side chains to the many polymer chain. This would represent a lower-density polymer as the steric hindrance of the side chains prevents the polymer chains from packing as closely together.

branch chain example

Let’s start a new polymer chain and this time include two different types of monomers. You may differentiate your monomer molecules through using paperclips of different types, sizes or colours. If you have a large enough collection of paperclips at your disposal then you can make all of the types of polymer listed below and then compare them.

First put your paperclips together in a random order, this would indicate two monomers which are able to react with both themselves and the other available monomer. Next create a chain of alternating monomers. These monomers might be bi-functional. The functional groups they possess can only react with the functional groups on the other monomers. Finally create a block co-polymer which consists of a length of a single type of monomer followed by another length of the other monomer. As each monomer might have different properties these are carried into the properties of the polymer. Most commonly one monomer will by hydrophilic and the other monomer will be hydrophobic. This creates a polymer with a hydrophilic section and a hydrophobic section.

Polymers with discrete hydrophilic and hydrophobic sections can aggregate into micelles when placed in water. They will have a hydrophilic exterior and hydrophobic interior. The interior can be used to house drugs for targeted delivery or to “capture” oil and dirt when used in soaps and washing-up liquids.

If you have any remaining paperclips then you can investigate the effects of cross-linking between chains. Connect separate polymer chains together through the regular placement of cross-linking bond paperclips and you should get a sheet of paperclip chains. Is the sheet strong enough to hold the weight of a tennis ball? Can you join the chains close enough to hold a marble?

straight chain example

When you are done we would love to see your results! Upload a picture of your models using our open Padlet or the Twitter hashtag #FLchemistry.

Adapted from: Y. Umar, J. Chem. Educ., 2014, 91, 1667.


Modelling competition

There will be a prize for the best photo of your model(s) on our Padlet and/or Twitter site by 9am on Monday 31 July. The prize will be given to the person whose photo, in the opinion of Andy, is the most striking, detailed, informative and memorable. We will advertise the name of the winner in week 5 (in the comments section below) who will be sent a copy of Chemistry3 and a Chemistry@York fidget spinner. (This competition is being run by Andy / University of York and is not affiliated with FutureLearn and any personal details submitted by the learner will only be used for the purpose of sending the prize.)
Why not give it a go?

Share this video:

This video is from the free online course:

Exploring Everyday Chemistry

University of York