7.8

Skip to 0 minutes and 9 secondsSPEAKER 1: Well, that's it. The course is nearly over.

Skip to 0 minutes and 13 secondsSPEAKER 2: We hope you've enjoyed exploring engineering mechanics, discovering a way of thinking and developing new skills. We've covered a lot of ground with our experiments, analysis, and design.

Skip to 0 minutes and 27 secondsSPEAKER 1: And, of course, we have highlighted the engineering mindset.

Skip to 0 minutes and 31 secondsSPEAKER 2: In week one, we looked at what a load does to an elastic element. And we saw the difference between static and dynamic conditions.

Skip to 0 minutes and 40 secondsSPEAKER 1: In week two, we used free-body diagrams to reveal forces. We saw how forces add and checked it out with force transducers.

Skip to 0 minutes and 49 secondsSPEAKER 2: Equilibrium appeared. The design task highlighted engineering responsibility.

Skip to 0 minutes and 56 secondsSPEAKER 1: In week three, we explored twisting effects.

Skip to 1 minute and 0 secondsSPEAKER 2: They introduce a new equilibrium equation.

Skip to 1 minute and 4 secondsSPEAKER 1: We saw how to draw FBDs for rigid bodies and used them with equilibrium to solve practical problems.

Skip to 1 minute and 11 secondsSPEAKER 2: It was a magic moment.

Skip to 1 minute and 14 secondsSPEAKER 1: In the rest of the course, we looked at the different types of loads we might need to include on our FBDs.

Skip to 1 minute and 21 secondsSPEAKER 2: In week four, it was gravity, weight, and where it acts. We found the centre of gravity. It is another application of moments.

Skip to 1 minute and 32 secondsSPEAKER 1: In week five, it was friction. Sometimes we want less friction. Sometimes we want more. We saw how a rough-and-ready theory is applied in practice.

Skip to 1 minute and 44 secondsSPEAKER 2: In week six, it was wind loads. And that introduced a beautiful equation. We applied the analysis to vehicles.

Skip to 1 minute and 54 secondsSPEAKER 1: To maintain steady motion of a vehicle, we must overcome drag from our three sources-- hill climbing gravity, rolling resistance friction, and air resistance wind.

Skip to 2 minutes and 6 secondsSPEAKER 2: And we saw how to find the power that a vehicle needs for a specified performance.

Skip to 2 minutes and 12 secondsSPEAKER 1: In week seven, we started looking at dynamics, accelerations, but mostly that will be for another time.

Skip to 2 minutes and 19 secondsSPEAKER 2: Now, whatever you choose to do in future, you will have begun to see the world through engineers’ eyes.

Skip to 2 minutes and 27 secondsSPEAKER 1: Maybe you have been changed forever.

Through Engineers' Eyes

This short video tells how we thought your engineers’ eyes might have developed over the course.

Does it seem that way to you?

Share this video:

This video is from the free online course:

Through Engineers' Eyes: Engineering Mechanics by Experiment, Analysis and Design

UNSW Sydney