Skip to 0 minutes and 4 seconds DOUGLAS MACBETH: In this video we’ll look at performance measurement.
Skip to 0 minutes and 10 seconds Measurement and control is fundamental to all management processes. Of course, sometimes we are not in the position to control directly by issuing instructions which must be obeyed for example. And then we must try to influence another to move in our desired directions. But the general principles are the same. Measurement is important to recognise and decide on actions needed. The essence is that we need a lot of data as information. We need decision processes and time to act and a capability to take the desired remedial action. The list of questions in this slide covers these features. Sometimes variations are normal and should not be reacted to, for example somewhat oversteering the car.
Skip to 1 minute and 4 seconds But the trick is to monitor the trend to see if the variation cancels itself out or is dangerously amplified over time. We measure for different reasons. Classic control is what our room temperature thermostat does to switch heat on if the temperature’s lower than was set or switch off the heat if the temperature is already above the chosen value. The whole process of identifying– and in contract terms– agreeing what the key performance indicators are and then measuring against them falls into this category of classic control. Stakeholders want to know how we are performing against their expectations.
Skip to 1 minute and 49 seconds So we measure in order that we can present the data in a suitable form for their agendas, for example, tax payments to government treasury functions or profit forecasts for investors. This demonstrates that we are still fit to operate. These can be actual licenses. For example, for transportation services, the airline is safe to fly with. Or intangible, for example, after a major contract failure, are we happy to award business to the company that failed to control another contract? Measurements also should be used to check that what we thought were the right ways to achieve some goal are actually delivering, and if not, to reconsider strategies and objectives.
Skip to 2 minutes and 36 seconds Measurements are also used to encourage or compel renewed efforts at meeting the set objectives. And this can be more or less firmly presented. For example, annual personal appraisals can demonstrate these features. In the business relationship and contract management process, we need all parties to actively measure and challenge each other against the promises and commitments made in the contract and to look for continuous improvement. Ideally, we want everything to go as planned without the need for extra measures and discussions or disputes for in that direction, my increased costs and decreased output performance and overall unsatisfactory contract management. We should never disappoint a partner and never be afraid to publicly celebrate successes. There’s always a social side to business relationships.
Skip to 3 minutes and 35 seconds And we need to pay attention to these dimensions, alongside quantified financial performance indicators.
Performance measurement is done in different ways and for different reasons so we should understand these issues and recognise how to design and operate appropriate measurements to ensure our business is delivering results as intended.
It also creates information to use in managing the business progress and reporting to various stakeholders.
In this video, Douglas Macbeth guides you through the performance measurement process. He highlights the particular challenges of measuring the performance of contracts.
What does performance measurement try to do?
Is there a difference between control and enablement? Who should do the measuring? What do you do with the results?
© University of Southampton