Skip to 0 minutes and 7 secondsWe’ll start by recapping some fundamentals of two-dimensional geometry. To start with, we’re going to talk about a Euclidian plane. A Euclidian plane is a non-curved surface where the rules of Euclidian geometry apply. We normally take this for granted. We’re just going to be explicit about the fact that we’re working with flat surfaces. The second concept is Cartesian coordinates. Again, this is a concept you should be well familiar with. We have a set of orthogonal axes typically labelled X and Y. We have a point P and we describe its position with respect to the origin in terms of distances along the X and Y axes.

Skip to 0 minutes and 47 secondsA concept that is perhaps less familiar to you will be homogenous coordinates and we’re going to be using them a lot in this lecture. Those of you who’ve done the Introduction to Robotics course will have already encountered homogenous coordinates. To represent a point in a two-dimensional Cartesian space, we describe it by a pair of numbers written as tuple X, Y and we say that this point lives in the space of two-dimensional real numbers, which we denote by the symbol R2 (R squared). In homogenous coordinates, we represent the same point with three numbers. In this case, we’ve represent it as X, Y and the number one. In fact, the number one is somewhat arbitrary; it could be any non-zero constant.

Skip to 1 minute and 31 secondsWe say now that this point belongs to the two-dimensional projective space, which we denote by the symbol P2 (P squared). So it’s the same point, just two different ways to represent it. The homogenous representation, the representation in projective space. Now to convert from homogenous coordinate to a Cartesian coordinate, I’m going to start with the very general homogenous coordinate denoted here as X tilde, Y tilde and Z tilde. To convert it through a Cartesian coordinate what I do is take the first two numbers and divide by the third. So X and Y Cartesian coordinates are given by X tilde on Z tilde and Y tilde on Z tilde respectively.

Skip to 2 minutes and 12 secondsNow a mathematician would say that in projective space, lines and points have duals. They have equivalent representations. Some very interesting and very useful things flow from this duality. We can write a line in homogenous form a little bit different to what we’re used to but we can write a line as three numbers denoted here as L1, L2 and L3. Now imagine that I’ve got a point which moves along that line. So the line is really the set of all possible points that lie along it. I can express the fact that the point lies on the line by the dot product of the line and the point being equal to zero.

Skip to 2 minutes and 51 secondsWe refer to this as the point equation of a line. A line is defined in terms of all the points that could possibly lie along it. Now I can expand that out and we can see that looks a little bit different to the conventional Cartesian representation of a line. But if we do the transformation from homogenous coordinates to Cartesian coordinates, we can show that these two representations of a line are equivalent. An advantage of using the homogenous form is that it’s very easy to represent a line that is vertical, where in Cartesian coordinates that means that the grading of the line is equal to infinity, in homogenous form, we treat that situation very simply and conveniently.

Skip to 3 minutes and 34 secondsWe don’t need to introduce any infinities. We also might be interested in how to describe a line that joins two points. So here we have two points and here’s a line that passes through those two points. Then the homogenous representation of the line, which remember is the three vector, is given simply by the cross-product of the two points that lie on the line. So a very, very simple way of finding the equation of a line that joins two points much, much more convenient than it is for Cartesian coordinates. We might also be interested in the problem of the coordinate of the point at the intersection of two lines.

Skip to 4 minutes and 10 secondsSo here we have two lines and this is the intersection point and the intersection point is given by the cross-product of the two lines. We call this the line equation of a point. The point is defined in terms of two lines. So let’s create a point. A horizontal of 100. A vertical coordinate of 200. And points are represented as Coulomb vectors. So that’s a row vector that I’ve written just there, so I will transpose it. So that will display as a Coulomb vector. So this is a Euclidean or Cartesian coordinate for a point.

Skip to 4 minutes and 46 secondsNow we can convert the Euclidean coordinate into a homogeneous coordinate using the function e2h, and we can see that all it has done is appended a 1 to it. So now instead of a vector with two elements, it’s now a Coulomb vector with three elements. The last element is a 1. Now we can convert the homogeneous coordinate back to a Euclidean coordinate by using the inverse function h2e, for homogeneous to Euclidean, and I apply that to the answer for the last operation and we see that it is back now to a vector with two elements. The result is the vector that we started with.

# Homogeneous coordinates

Let’s recap the basics of homogeneous coordinates to represent points on a Euclidian plane.

This video outlines how to represent points in a two-dimensional Cartesian space. We look at how to convert Cartesian coordinates to homogeneous coordinates and vice versa. Knowing this homogeneous representation is going to be very handy for us in this course.

© QUT 2017 unless otherwise noted. All rights reserved. CRICOS No. 00213J